Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Steering Wheel on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Steering wheel

See other generations:
Video tutorial

In this short tutorial, you will learn how to change the steering wheel on a Fiat Panda 169 in just a few minutes. This procedure is valid for many other car models.

First, disconnect the battery. As shown in the video, detach the three lower clips of the steering wheel (related to the airbag) using a medium-sized flat screwdriver.

Disconnect the wires for the horn and steering wheel controls, remembering how they connect. Unscrew the central bolt with a 24 mm socket (it requires some force) and you can now remove the steering wheel.

Fit the new steering wheel and re-tighten the bolt.


Updated on 18 April 2026 by ScegliAuto


Related tutorials

How to Remove the Steering Wheel from a Fiat Panda
How to Remove the Steering Wheel from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you can begin, sit in the driver's seat of your Fiat Panda. Start by turning the steering wheel 90 degrees to the right. This will give you ac…
Everything You Don't Know About the Fiat Panda
Everything You Don't Know About the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) The Fiat Panda is undoubtedly the most purchased car by families and more. Sometimes it is thought that due to its size, the Panda does not have any …
How to Replace the Gear Knob on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, sit in the driver's seat of your Fiat Panda. It is strongly advised to perform this operation with the engine off, to avoid acc…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos