Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob on a Fiat Panda?

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Shift knob

Before you can start, sit in the driver's seat of your Fiat Panda. It is strongly advised to perform this operation with the engine off, to avoid accidentally engaging a gear during the replacement. Start by pulling the gear knob upwards firmly. Once you have completed this step, you will have finished the removal. To install the new gear knob, reinsert it and then give it two firm taps. By doing this, you will have successfully completed the replacement of the gear knob on your Fiat Panda.

Updated on 4 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Removing the Gear Knob on Fiat Panda
Removing the Gear Knob on Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How to remove the gear knob on the second series Fiat Panda? Let's see how to remove the knob and the trim gaiter. Detach the frame where the leather…
How to replace the gear knob and gaiter of the Fiat Panda
How to replace the gear knob and gaiter of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) The instructions in this guide will show us the disassembly and replacement process of the gear knob and gear lever gaiter of the Fiat Panda. First o…
How to replace the gear knob and gear lever gaiter of the Fiat Panda
How to replace the gear knob and gear lever gaiter of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) We will briefly see the step-by-step instructions on how to disassemble and replace the knob and the gear lever boot of the Fiat Panda. First, we get…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos