Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the gear knob and gaiter of the Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Shift knob

The instructions in this guide will show us the disassembly and replacement process of the gear knob and gear lever gaiter of the Fiat Panda. First of all, we get into the car and start by detaching the gear lever gaiter from the gear knob; then we pull and unscrew the gear knob to detach and remove it from the lever, as shown in the video. At this point, we proceed to install the new gear knob, first installing the gaiter; we securely fix the gear knob on the lever so as not to create any play between the lever and the knob, following the video tutorial until the end!

Posted on 23 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the Gear Knob on Fiat Panda
Removing the Gear Knob on Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How to remove the gear knob on the second series Fiat Panda? Let's see how to remove the knob and the trim gaiter. Detach the frame where the leather…
Replacing the Gear Gaiter on Fiat Panda
Replacing the Gear Gaiter on Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Need to replace the gear gaiter on a Fiat Panda? Here’s how to remove the damaged gaiter from the top of the gear lever. Remove the gear knob from th…
How to Replace the Gear Gaiter on the Fiat Panda
How to Replace the Gear Gaiter on the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To replace the gear gaiter on the Fiat Panda, follow these steps: start by pulling the gear knob upwards, remove the spring from the knob, then pull …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos