Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob on a Fiat Panda

Model: Fiat Panda MK 1, 141 - Years: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
Part: Shift knob

See other generations:
Video tutorial

Start by unscrewing and removing the screws that secure the gaiter of the gear knob. Remove the internal rubber and take off the gaiter.

Since the gear knob on the Panda is press-fitted, you will need to heat the neck of the knob. Once this step is complete, you can remove the knob.

Before setting the knob aside completely, take the internal adapter, which you will need to refit onto the gear lever. At this point, to install the new knob, simply follow the initial instructions in reverse, and you will have successfully completed the replacement.


Updated on 2 May 2026 by ScegliAuto


Related tutorials

How to Replace the Gear Knob on a Fiat Panda?
How to Replace the Gear Knob on a Fiat Panda?
Fiat Panda (2012-2021 / ) To replace the gear knob on a Fiat Panda, push down on the lower component of the gear knob. Once this part is lowered, you can pull the entire gear …
How to Replace the Gear Knob of the Fiat Panda?
How to Replace the Gear Knob of the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the gear knob of the Fiat Panda, grip the old knob at the end of the lever and twist it slightly while pulling upwards. This will detach t…
How to Replace the Gear Knob on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, sit in the driver's seat of your Fiat Panda. It is strongly advised to perform this operation with the engine off, to avoid acc…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos