Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob on a Fiat Panda?

Model: Fiat Panda - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Shift knob

See other generations:
Video tutorial

To replace the gear knob on a Fiat Panda, push down on the lower component of the gear knob. Once this part is lowered, you can pull the entire gear knob upwards and remove it from the gear lever.

After the old knob is removed from its housing, insert a new one by pushing it onto the appropriate lever. Once positioned, secure it in place by tightening the small screws that need to be inserted into the holes on its rear.


Updated on 28 May 2026 by ScegliAuto


Related tutorials

Removing the Gear Knob on Fiat Panda
Removing the Gear Knob on Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How to remove the gear knob on the second series Fiat Panda? Let's see how to remove the knob and the trim gaiter. Detach the frame where the leather…
How to Replace the Gear Knob on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, sit in the driver's seat of your Fiat Panda. It is strongly advised to perform this operation with the engine off, to avoid acc…
How to Replace the Gear Knob of the Fiat Panda?
How to Replace the Gear Knob of the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the gear knob of the Fiat Panda, grip the old knob at the end of the lever and twist it slightly while pulling upwards. This will detach t…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos