Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the gear knob and gear lever gaiter of the Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Shift knob

See other generations:
Video tutorial

We will briefly see the step-by-step instructions on how to disassemble and replace the knob and the gear lever boot of the Fiat Panda. First, we get into the car and start gently detaching the gear lever boot from the base, levering on the sides; then we pull forcefully on the gear knob to detach it from the lever, as shown in the video.

At this point, we proceed to change if necessary both the knob and the boot, inserting the latter first and then properly fixing the knob on the lever; make sure the knob is securely attached to the gear lever!


Posted on 20 January 2025 by ScegliAuto


Related tutorials

How to Replace the Gear Gaiter on the Fiat Panda
How to Replace the Gear Gaiter on the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To replace the gear gaiter on the Fiat Panda, follow these steps: start by pulling the gear knob upwards, remove the spring from the knob, then pull …
Replacing the Gear Gaiter on Fiat Panda
Replacing the Gear Gaiter on Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Need to replace the gear gaiter on a Fiat Panda? Here’s how to remove the damaged gaiter from the top of the gear lever. Remove the gear knob from th…
How to Remove the Gear Shift Gaiter on a Fiat Panda
How to Remove the Gear Shift Gaiter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, sit in the driver's seat of your Fiat Panda. Begin by unclipping and removing the gear knob by pulling it firmly upwards, then remov…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos