Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : Replace gearshift gaiter on Fiat Panda

Fiat Panda - Video tutorial

Model: Fiat Panda MK 2, 169 - Years 2003-2012
Part: Gearshift gaiter
Operation: Replace gearshift gaiter on Fiat Panda

Replacing the gearshift gaiter on Fiat Panda? Let's see how the damaged headset is removed from above the shift rod. Remove the knob from the shift rod (grab the knob and detach it from the rod), remove the fixing clips of the cap frame with a plastic lever. We remove the leather cap from the edge of the central tunnel. To carry out the assembly, we grab the cap and insert it into the rod on the central tunnel, then, insert the new knob and block it in the gear rod. We check that we have properly assembled all the pieces relating to the gearshift gaiter.


Posted on 15 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Panda 2003-2012 - How much does the Fiat Panda gearshift gaiter cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos