Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Steering Wheel of a Fiat Panda 169?

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Steering wheel

See other generations:
Video tutorial

Let's see how to replace the steering wheel of a Fiat Panda 169: you can find a used one on eBay for £65.00 (+ £15.00 shipping), but remember that used deals must be grabbed quickly. A scrap dealer can also help you with this part.

First, disconnect the negative terminal of the battery. Then, remove the horn/airbag assembly; there are no screws, just clips at the three spokes of the steering wheel, inserting a screwdriver from behind.

Disconnect the electrical connectors. Now, remove the 24mm nut that secures the steering wheel.

There is a mark on the steering column and the wheel to help you align it correctly. Remove the old wheel, being careful not to disturb anything inside the column, and reposition the new one. Reconnect the airbag and horn electrical connectors and press it back into place.

Finally, reconnect the negative terminal of the battery. Job done.


Updated on 4 July 2026 by ScegliAuto


Related tutorials

How to Replace the Steering Wheel on a Fiat Panda
How to Replace the Steering Wheel on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this short tutorial, you will learn how to change the steering wheel on a Fiat Panda 169 in just a few minutes. This procedure is valid for many o…
How to remove the steering wheel from a Fiat Panda 169.
How to remove the steering wheel from a Fiat Panda 169.
Fiat Panda (2003-2012 / 169, MK 2) In this video tutorial, you can see how to remove the steering wheel from the Panda 100 hp model 169, following simple steps that will guide you in m…
How to Remove the Airbag and Steering Wheel on the Fiat Panda 2 (169)
How to Remove the Airbag and Steering Wheel on the Fiat Panda 2 (169)
Fiat Panda (2003-2012 / 169, MK 2) In this video tutorial, you will learn how to remove the airbag and steering wheel on the Fiat Panda second series, version 169, by following these s…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos