Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Drive Shaft on a Fiat Panda 169 4x4

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Drivetrain

Discover in this video the instructions for replacing the drive shaft on a Fiat Panda 169 4x4. First, lift the vehicle and position the jack under the drive shaft to remove it later; then, dismantle the front flange using hex keys. Next, undo the bolts of the central support to remove it; you can now take out the drive shaft and replace it with the new one, following the video tutorial to the end!

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Drive Shaft from a Fiat Panda 4x4
How to Remove the Drive Shaft from a Fiat Panda 4x4
Fiat Panda (2003-2012 / 169, MK 2) In this guide, learn how to dismantle the drive shaft and replace the oil seal on a Fiat Panda 4x4. First, raise the vehicle and start unscrewing all…
Removing the Drive Shaft on a Fiat Panda
Removing the Drive Shaft on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Learn how to remove the drive shaft on a Fiat Panda. Lift the car on a column lift and locate the drive shaft. Using a socket spanner, undo the secur…
How to Replace the Engine Oil and Oil Filter on the Fiat Panda 169 4x4
How to Replace the Engine Oil and Oil Filter on the Fiat Panda 169 4x4
Fiat Panda (2003-2012 / 169, MK 2) Let’s discover the procedure to perform routine maintenance by replacing the engine oil and oil filter on the Fiat Panda 169 4x4. First, lift the veh…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos