Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gearbox Flange on a Fiat Panda 4x4?

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Transmission

To replace the gearbox flange on a Fiat Panda 4x4, you need to remove the front left wheel by unscrewing its bolts, so that the corresponding driveshaft can be removed. Once the driveshaft has been removed from its housing, you can unscrew the flange fixing bolts so that it can be pulled out of its housing. Once the new flange is in place, secure it with the bolts and then you can install the driveshaft and the corresponding front wheel with its bolts.

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Drive Shaft on a Fiat Panda 169 4x4
How to Replace the Drive Shaft on a Fiat Panda 169 4x4
Fiat Panda (2003-2012 / 169, MK 2) Discover in this video the instructions for replacing the drive shaft on a Fiat Panda 169 4x4. First, lift the vehicle and position the jack under th…
How to Change the Rear Differential Oil of the Fiat Panda 4x4 169
How to Change the Rear Differential Oil of the Fiat Panda 4x4 169
Fiat Panda (2003-2012 / 169, MK 2) In today's tutorial video, we will see how to change the rear differential oil on the Fiat Panda 4x4 169. Start by lifting the car and locating the p…
Replacing the Gear Gaiter on the Fiat Panda 4x4
Replacing the Gear Gaiter on the Fiat Panda 4x4
Fiat Panda (1980-2003 / 141, MK 1) In today's video tutorial, we will cover the main instructions for dismantling and replacing the gear gaiter on the Fiat Panda 4x4. First, lift the v…

    Frequently Asked Questions

    • Panda 2003-2012 - What to do if the gearbox is noisy in the Fiat Panda? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos