Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : Propeller shaft replacement on Fiat Panda 4x4

Fiat Panda - Video tutorial

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Transmission
Operation: Propeller shaft replacement on Fiat Panda 4x4

For this process it is necessary to be able to work with the auto raised and therefore be able to work under it. It is a process suitable for fairly experienced people. Remove the exhaust pipe and, at this point, you can remove the drive shaft holder and plate. Once you have arrived here, you can now remove the protective plastic of the catalyst. Unscrew the bolts holding the shaft attached to the front of the car and rear differential, then remove the tailpipe shield and finally the driveshaft center support.


Posted on 31 January 2024 by ScegliAuto

This video is currently unavailable

    Frequently Asked Questions

    • Panda 2012-2023 - What does the warning light with an exclamation point inside a gear in the Fiat Panda mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos