Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Driveshaft on Panda 4x4

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Drivetrain

This video shows the essential operations and the necessary tools for removing the driveshaft on a Panda 4x4. Lift the car using four jacks or a hydraulic lift, and with a suitable socket spanner, undo the securing bolts located on the sides of the driveshaft (then remove the pins around the plates). Once completed, simply pull it longitudinally towards the engine and extract it from the differential. To fit the new driveshaft, perform the operations in reverse order, ensuring to insert it first into the engine side and then into the differential side.

Updated on 22 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Gearbox Flange on a Fiat Panda 4x4?
How to Replace the Gearbox Flange on a Fiat Panda 4x4?
Fiat Panda (1980-2003 / 141, MK 1) To replace the gearbox flange on a Fiat Panda 4x4, you need to remove the front left wheel by unscrewing its bolts, so that the corresponding drivesh…
Removing the Front Driveshaft Boot on Fiat Panda 4x4
Removing the Front Driveshaft Boot on Fiat Panda 4x4
Fiat Panda (1980-2003 / 141, MK 1) See how to replace the boot on the driveshaft of the legendary Fiat Panda 4x4. First, remove the brake caliper by taking out the bolt that holds it i…
Replacing the Gear Gaiter on the Fiat Panda 4x4
Replacing the Gear Gaiter on the Fiat Panda 4x4
Fiat Panda (1980-2003 / 141, MK 1) In today's video tutorial, we will cover the main instructions for dismantling and replacing the gear gaiter on the Fiat Panda 4x4. First, lift the v…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos