Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Panda
  6. : Center console tunnel

Fiat Panda - Center console tunnel

Center Console Tunnel Fiat Panda (2003-2012 / 169, mk 2)

Fiat Panda (2003-2012 / 169, MK 2)
How to Remove the Centre Tunnel from a Fiat Panda

How to remove the centre tunnel from a Fiat Panda? Use a plastic lever to pry off the trim located at the bottom of the centre tunnel, and remove the cigarette …Read all…
Posted on 2 April 2026 by ScegliAuto
Fiat Panda (1980-2003 / MK 1, 141)
How to Remove the Glove Compartment from the Centre Tunnel of a Fiat Panda

Learn how to remove the glove compartment from the centre tunnel of a Fiat Panda. Using a plastic lever, pry off the cover located at the bottom of the centre …Read all…
Posted on 22 March 2026 by ScegliAuto

Center Console Tunnel Fiat Panda (1980-2003 / mk 1, 141)

Fiat Panda (2003-2012 / 169, MK 2)
How to Remove the Centre Tunnel from a Fiat Panda

How to remove the centre tunnel from a Fiat Panda? Use a plastic lever to pry off the trim located at the bottom of the centre tunnel, and remove the cigarette …Read all…
Posted on 2 April 2026 by ScegliAuto
Fiat Panda (1980-2003 / MK 1, 141)
How to Remove the Glove Compartment from the Centre Tunnel of a Fiat Panda

Learn how to remove the glove compartment from the centre tunnel of a Fiat Panda. Using a plastic lever, pry off the cover located at the bottom of the centre …Read all…
Posted on 22 March 2026 by ScegliAuto

Cigarette lighter (4) Airbag (15) Alternator (4) Speaker (2) Shocks (18) Antenna (1) Air conditioning (4) Car stereo (38) Anti-roll bar (1) Roof rack bars (5) Battery (13) Ignition coil (2) Air vents (2) Control arm (3) Transmission (9) Spark plugs (19) Glow plugs (2) Carburetor (2) Body (15) Glove compartment (2) Snow chains (1) Control unit (4) Key (25) Timing belt (35) V-belt (3) Air conditioner (1) A/C controls (2) Onboard computer (8) Checks and maintenance (72) Throttle body (2) Dashboard (14) Shifter boot (5) CV boot (5) Bearing (7) MAF sensor (1) Differential (4) Brake rotors (3) Wheel spacers (1) Headlight (31) Tail light (18) Fog lights (10) Air filter (29) Cabin air filter (36) Fuel filter (4) Diesel fuel filter (7) Oil filter (10) Parking brake (5) Clutch (9) Grille (1) Fuel injectors (4) Accessory kit (5) Light bulb (20) Side marker bulb (2) Headlight bulb (30) Tail light bulb (13) Interior dome light bulb (2) Antifreeze coolant (5) Instrument panel light (12) License plate light (5) (1) Handle (3) Exhaust muffler (6) Engine (10) Power window motor (4) Starter motor (8) Transmission fluid (5) Engine oil (16) Clock (36) Door trim panel (22) Windshield (3) Front bumper (10) Rear bumper (8) Brake pads (18) Hydraulic pistons (3) Shift knob (16) Pump (12) Fuel pump (15) Car door (6) Push button (1) Instrument cluster (11) Radiator (7) Heater core (11) Wheel (3) Fuse box (37) Seat (33) Axle shaft (4) Crankshaft position sensor (3) Parking sensors (3) Door lock (11) Suspension system (2) Side mirror (24) Rearview mirror (2) Warning light – error code (21) Tire pressure warning light (33) Service warning light (44) Manufacturer emblem (2) Engine mount (3) Brake drums and shoes (4) Fuel cap (3) Windshield wipers (21) Thermostat (12) Cylinder head (1) Tie rods (2) Drivetrain (11) Center console tunnel (2) Turbocharger (1) Windshield washer nozzle (2) Valve (2) EGR valve (3) Blower motor (5) Side window (4) Steering wheel (14)

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos