Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Glove Compartment from the Centre Tunnel of a Fiat Panda

Model: Fiat Panda MK 1, 141 - Years: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
Part: Center console tunnel

See other generations:
Video tutorial

Learn how to remove the glove compartment from the centre tunnel of a Fiat Panda. Using a plastic lever, pry off the cover located at the bottom of the centre tunnel.

After removing the plastic cover, unscrew the securing bolts with a socket spanner found on the sides and centre of the centre tunnel. Once this is done, pull out the tunnel and disconnect any power cables.

Finally, insert the new part into the centre tunnel or refurbish the old one; reassemble all components of the glove compartment as they were removed previously.


Updated on 5 March 2026 by ScegliAuto


Related tutorials

How to Remove the Centre Tunnel from a Fiat Panda
How to Remove the Centre Tunnel from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How to remove the centre tunnel from a Fiat Panda? Use a plastic lever to pry off the trim located at the bottom of the centre tunnel, and remove the…
Removing Cabin Air Filter from Dashboard on Fiat Panda
Removing Cabin Air Filter from Dashboard on Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How to remove the cabin air filter on a Panda? Here's how to take it off and put it back on. The cabin air filter is located at the bottom right of t…
How to Remove the Heating Radiator on a Fiat Panda
How to Remove the Heating Radiator on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Watch this video to learn how to remove the heating radiator from a Fiat Panda. First, remove the plastic cover from the centre tunnel (located under…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos