Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Centre Tunnel from a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Center console tunnel

See other generations:
Video tutorial

How to remove the centre tunnel from a Fiat Panda? Use a plastic lever to pry off the trim located at the bottom of the centre tunnel, and remove the cigarette lighter socket. After removing the socket: unscrew the securing screws located throughout the centre tunnel using a screwdriver.

Once this is done, pull the tunnel off, disconnect any power cables (lift the handbrake lever). Finally, insert the new piece into the centre tunnel space, and reassemble all the components of the glove compartment as they were removed earlier.


Updated on 12 March 2026 by ScegliAuto


Related tutorials

How to Remove the Glove Compartment from the Centre Tunnel of a Fiat Panda
How to Remove the Glove Compartment from the Centre Tunnel of a Fiat Panda
Fiat Panda (1980-2003 / MK 1, 141) Learn how to remove the glove compartment from the centre tunnel of a Fiat Panda. Using a plastic lever, pry off the cover located at the bottom of t…
Removing Cabin Air Filter from Dashboard on Fiat Panda
Removing Cabin Air Filter from Dashboard on Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How to remove the cabin air filter on a Panda? Here's how to take it off and put it back on. The cabin air filter is located at the bottom right of t…
Replacing the Gear Gaiter on Fiat Panda
Replacing the Gear Gaiter on Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Need to replace the gear gaiter on a Fiat Panda? Here’s how to remove the damaged gaiter from the top of the gear lever. Remove the gear knob from th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos