Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cigarette lighter socket of the Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Cigarette lighter

See other generations:
Video tutorial

In this guide we will see how to disassemble and replace the cigarette lighter socket of the Fiat Panda. First of all, we get into the car and start levering the cigarette lighter socket; then we disconnect the electrical connector that we find underneath, thus removing the cigarette lighter and the socket, as shown in the video.

At this point, we install the new 12V socket, removing the cigarette lighter from the plastic cover and adapting the new one; we make the electrical connection and reassemble everything on the central tunnel, checking the operation of the new socket (in this case USB).


Posted on 4 February 2025 by ScegliAuto


Related tutorials

How to Replace the Cigarette Lighter Bulb in the Fiat Panda
How to Replace the Cigarette Lighter Bulb in the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In today's video, see how to replace the cigarette lighter bulb in the second series Fiat Panda. First, obtain a pointed object, such as a flat-head …
How to Install the Cigarette Lighter Socket on the Fiat Panda?
How to Install the Cigarette Lighter Socket on the Fiat Panda?
Fiat Panda (1980-2003 / MK 1, 141) To install the cigarette lighter socket on the Fiat Panda, you need to install a backup battery to connect the device, so as not to compromise the op…
How to Replace the Cabin Filter in a Fiat Panda Cross
How to Replace the Cabin Filter in a Fiat Panda Cross
Fiat Panda (2012-2026 / 319, MK 3) In this tutorial, you will see how to replace the cabin air filter in a Fiat Panda Cross, a very simple operation. It is located under the dashboard,…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos