Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Cabin Air Filter from Dashboard on Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Cabin air filter

See other generations:
Video tutorial

How to remove the cabin air filter on a Panda? Here's how to take it off and put it back on. The cabin air filter is located at the bottom right of the centre tunnel. Remove the cover located at the lower right of the centre tunnel (unscrew the screw).

Unscrew the screws securing the cover, take off the cap from the filter holder, then extract the worn cabin filter. Insert a new cabin filter, ensuring it fits snugly around the walls of the box, and close the container with the air filter cover.

Refit the cover at the top of the centre tunnel and screw in the securing screw.


Updated on 28 March 2026 by ScegliAuto


Related tutorials

How to Remove the Cabin Air Filter on a Fiat Panda
How to Remove the Cabin Air Filter on a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) In this video, learn how to remove the cabin air filter on a Fiat Panda (new model). Use a plastic lever to detach the fabric cover located at the bo…
How to Remove the Cabin Air Filter in Fiat Panda
How to Remove the Cabin Air Filter in Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this video, see how to remove the cabin air filter in a Fiat Panda. The cabin filter is located at the bottom left of the glove compartment. Using…
Replacing the Cabin Air Filter of the Fiat Panda
Replacing the Cabin Air Filter of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Follow these instructions to remove and replace the cabin air filter of the Fiat Panda. First, get into the vehicle on the passenger side and remove …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos