Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Cabin Air Filter in Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Air filter

In this video, see how to remove the cabin air filter in a Fiat Panda. The cabin filter is located at the bottom left of the glove compartment. Using a plastic lever, pry off the cover located at the lower left of the dashboard, obtain a screwdriver or a battery drill, remove the cap from the filter holder, then extract the worn cabin filter. Insert a new cabin filter, ensuring it fits snugly around the walls of the box, reassemble the filter box cap and tighten the screws. Check the correct installation of the previously mounted parts.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Panda (2003-2012 / 169, MK 2) Follow these instructions to remove and replace the cabin air filter of the Fiat Panda. First, get into the vehicle on the passenger side and remove …
Fiat Panda (2003-2012 / 169, MK 2) Before starting, open the bonnet of your Fiat Panda to gain access to the engine bay. Begin by unfastening the securing clips of the air filter cover…
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, open the bonnet of your Fiat Panda to access the engine bay. Begin by unfastening the clips that secure the air filter cover. T…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos