Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter of the Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Cabin air filter

See other generations:
Video tutorial

Follow these instructions to remove and replace the cabin air filter of the Fiat Panda. First, get into the vehicle on the passenger side and remove the plastic cover located at the bottom to access the filter box; then remove the small rectangular cover on the left to extract the old cabin air filter, as shown in the video.

Now, install the new cabin air filter, ensuring it is fitted the correct way, and refit the covers!


Updated on 15 August 2026 by ScegliAuto


Related tutorials

How to Replace the Pollen Filter on the Fiat Panda
How to Replace the Pollen Filter on the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Today, we will see the necessary guide to remove and replace the pollen filter cartridge on the Fiat Panda, following the instructions below. First, …
How to Perform a Full Service on a Fiat Panda
How to Perform a Full Service on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) If you want to perform a full service on your Fiat Panda without going to a garage, and thus save money, you can use this video as a guideline for th…
Where is the pollen filter located in the 2016 Fiat Panda?
Where is the pollen filter located in the 2016 Fiat Panda?
Fiat Panda (2012-2026 / 319, MK 3) The cabin air filter, more commonly known as the pollen filter, is an essential component that filters the incoming air into the cabin to prevent pas…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos