Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Pollen Filter on the Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Cabin air filter

Today, we will see the necessary guide to remove and replace the pollen filter cartridge on the Fiat Panda, following the instructions below. First, get in the car on the passenger side and start unscrewing the screws found on the floor; then remove the cover of the pollen filter box, extracting the old cartridge as shown in the video. Now insert the new cabin air filter in the correct orientation; finally, reassemble the cover and the plastic cover of the mat, following the video to the end!

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Pollen Filter on the Fiat Panda 169
How to Replace the Pollen Filter on the Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) If the pollen filter in your Fiat Panda 169 shows excessive signs of wear that do not ensure optimal air quality, it is time to replace it completely…
Where is the pollen filter located in the 2016 Fiat Panda?
Where is the pollen filter located in the 2016 Fiat Panda?
Fiat Panda (2012-2026 / 319, MK 3) The cabin air filter, more commonly known as the pollen filter, is an essential component that filters the incoming air into the cabin to prevent pas…
How to Remove the Pollen Filter in a Fiat Panda
How to Remove the Pollen Filter in a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this guide, learn how to remove the pollen filter in a Fiat Panda. The cabin filter is located at the bottom left of the glove compartment (centra…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos