Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Heating Radiator on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Heater core

See other generations:
Video tutorial

Watch this video to learn how to remove the heating radiator from a Fiat Panda. First, remove the plastic cover from the centre tunnel (located under the centre tunnel) and the cover around the gearbox.

Unscrew the securing screws with a screwdriver as shown in the video and remove the black plastic cover that conceals the heating radiator. Once all the steps are completed, move to the engine bay: remove the plastic engine cover and disconnect the two hoses (unscrew the securing clips) of the radiator that extends into the cabin.

Install the new part. Reverse all the assembly steps.


Updated on 25 February 2026 by ScegliAuto


Related tutorials

How to Replace the Heater Radiator in a Fiat Panda
How to Replace the Heater Radiator in a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this brief guide, you will learn how to remove and replace the heater radiator in a Fiat Panda. First, get inside the vehicle and start by removin…
How to Remove the Heating Radiator from a Fiat Panda
How to Remove the Heating Radiator from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, sit in the driver's seat of your Fiat Panda. Begin by dislodging the gear lever gaiter from its housing and lifting it. Next, unscre…
Guide to Removing the Heating Radiator of the Fiat Panda
Guide to Removing the Heating Radiator of the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) In this video tutorial, you will learn how to remove and replace the heating radiator of the Fiat Panda. First, get inside the vehicle and remove the…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos