Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Heater Radiator in a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Heater core

See other generations:
Video tutorial

In this brief guide, you will learn how to remove and replace the heater radiator in a Fiat Panda. First, get inside the vehicle and start by removing the plastic panels located under the gear lever by unfastening them at the sides and unscrewing the screws underneath; then remove the plastic panel found at the bottom right on the driver's side, giving you access to the heater radiator, as shown in the video.

Now disconnect the radiator pipe, allowing any excess fluid to drain, and unscrew the radiator bracket screws to remove it and replace it with the new one (disconnecting the pipes from the engine bay).


Updated on 11 August 2026 by ScegliAuto


Related tutorials

How to Remove the Heating Fan from a Fiat Panda
How to Remove the Heating Fan from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) The heating fan in a Fiat Panda is located above the pedals. Before you can begin, you need to remove the relevant cover. Start by disconnecting the …
How to replace the heating radiator in the Fiat Panda?
How to replace the heating radiator in the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) In this tutorial we can see how to replace the heating radiator in the Fiat Panda, a simple operation but one that requires good manual skills. First…
How to Remove the Wing Mirror on a Fiat Panda
How to Remove the Wing Mirror on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How do you remove the mirror on a Fiat Panda? This video shows how to remove an external wing mirror on a Panda. Detach the mirror adjustment lever b…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos