Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Heating Fan from a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Blower motor

The heating fan in a Fiat Panda is located above the pedals. Before you can begin, you need to remove the relevant cover. Start by disconnecting the electrical connector that powers the fan. Next, unscrew the screw that secures the fan to its housing. Once you have removed the screw, rotate the fan clockwise by about ninety degrees, then pull it out of its housing. After completing this step, you can fully remove the fan, successfully finishing the disassembly.

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Heating malfunction in the Fiat Panda 169
Heating malfunction in the Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In this video we can see how to solve the problem of the heating system of the Fiat Panda 169 that is not working. The YouTuber discovered that the i…
Removing the Cabin Fan from a Fiat Panda 169
Removing the Cabin Fan from a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In this video tutorial, you will see how to remove the cabin fan from a Fiat Panda 169. First, get inside the car and remove the plastic side panel n…
Guide to Replacing the Cabin Fan on a Fiat Panda
Guide to Replacing the Cabin Fan on a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) In this brief and simple guide, you will see the steps to dismantle and replace the cabin fan on a Fiat Panda. First, get inside the vehicle and loca…

    Frequently Asked Questions

    • Panda 2003-2012 - Where is the interior blower resistor on the Fiat Panda? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos