Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the heating radiator in the Fiat Panda?

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Heater core

In this tutorial we can see how to replace the heating radiator in the Fiat Panda, a simple operation but one that requires good manual skills. First of all, we lift the gear lever gaiter, then we remove both the plastic base and the lower cover by unscrewing the respective fixing screws. We then remove the radiator cover, drain the system by disconnecting the lower hose, and slightly release the lower area of the dashboard by removing both the instrument panel and the various indicated panels. At this point, we can remove the radiator from its housing and install the replacement.

Posted on 28 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Heater Radiator in a Fiat Panda
How to Replace the Heater Radiator in a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this brief guide, you will learn how to remove and replace the heater radiator in a Fiat Panda. First, get inside the vehicle and start by removin…
Guide to Removing the Heating Radiator of the Fiat Panda
Guide to Removing the Heating Radiator of the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) In this video tutorial, you will learn how to remove and replace the heating radiator of the Fiat Panda. First, get inside the vehicle and remove the…
Guide to Replacing the Heating Radiator in the Fiat Panda
Guide to Replacing the Heating Radiator in the Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) Today's guide shows you the steps to remove and replace the heating radiator in the Fiat Panda. First, open the bonnet and start by removing the batt…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos