Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : Crankshaft RPM sensor

Fiat Panda - Crankshaft RPM sensor

Fiat Panda (2003-2012 / 169, MK 2)
How to replace the crankshaft rpm sensor on a Fiat Panda
Before starting, we will have to open the front hood of our Fiat Panda. So let's start by lifting the front of the machine. After that, we will have to unhook …read all…
Posted on 5 February 2024 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
Disassembly of the Fiat Panda engine speed sensor
In this video tutorial we will see how to remove the engine speed sensor of a Fiat Panda, in particular the 4X4 model. First we are going to disassemble the …read all…
Posted on 24 December 2023 by ScegliAuto
Fiat Panda (1980-2003 / 141, MK 1)
Replacing the distributor pressure switch
In some cars the ignition system of the candles was entrusted to a coil and an electrical contact which, when opened, created the energy necessary to generate …read all…
Posted on 16 July 2023 by ScegliAuto
Cigarette Lighter (3) Airbags (10) Alternator (4) Shock absorbers (15) Antenna (1) Air conditioning (4) Car stereo (33) Roof Rack Bars (4) Battery (9) Coil (2) Air Vents (2) Arm (2) Gearbox (9) Spark plugs (16) Glow plugs (2) Carburetor (1) Bodywork (10) Glove box (2) Control unit (3) Key (16) Timing belt (20) V-belt (3) Air conditioning controls (1) -board computer (16) Checks and maintenance (97) Throttle body (2) Dashboard (13) Gearshift gaiter (3) Drive shaft boot (5) Bearing (6) Mass air flow sensor (1) Differential (3) Brake discs (3) Spacers (1) Headlight (21) Tail light (14) Fog lights (10) Air filter (21) Cabin air filter (28) Petrol filter (4) Diesel filter (6) Oil filter (9) Hand brake (5) Clutch (8) Grille (1) Injectors (4) Accessory Kit (6) Light bulb (16) Side turn signal light bulb (1) Headlight bulb (22) Rear light bulb (10) Interior lights ceiling light bulb (2) Antifreeze liquid (4) Dashboard light (12) License plate light (3) Handle (2) Muffler (5) Engine (10) Window motor (4) Starter motor (4) Gear oil (4) Engine oil (13) Door panel (20) Windshield (3) Front bumper (8) Rear bumper (7) Brake pads (15) Hydraulic pistons (4) Tires (4) Gear Shift Knob (14) Pump (10) Fuel pump (14) Door (5) Push button (1) Instrument cluster (22) Radiator (7) Passenger compartment heating radiator (9) Wheel (2) Fuse box (21) Seat (30) Drive shaft (4) Crankshaft RPM sensor (3) Parking sensors (3) Lock (10) Suspensions (2) Outside rearview mirror (22) Interior rearview mirror (2) Manufacturer's coat of arms (2) Engine mount (3) Drums and shoes (4) Windscreen wipers (16) Thermostat (11) Engine head (1) Steering rods (2) Transmission (10) Central tunnel (2) Turbine (1) Windshield washer nozzle (2) Valve (2) EGR valve (2) Interior blower (4) Side window (3) Steering wheel (13)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos