Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Panda
  6. : Arm

Fiat Panda - Arm

Fiat Panda (2003-2012 / 169, MK 2)
How to replace the silent blocks of the Fiat Panda

To change the silent blocks of the rear axle of a Fiat Panda we operate as follows: remove the rear wheel, proceed to remove the shock absorber using a 15mm …read all…
Posted on 5 April 2024 by ScegliAuto
Fiat Panda (1980-2003 / 141, MK 1)
How to remove the arm of a Fiat Panda

How to remove the (front) arm of a Fiat Panda? First we put the car on a column bridge (jack) and loosen the wheel pins with a telescopic wrench, then, we lift …read all…
Posted on 10 November 2023 by ScegliAuto

Cigarette Lighter (3) Airbags (10) Alternator (4) Shock absorbers (15) Antenna (1) Air conditioning (4) Car stereo (33) Roof Rack Bars (4) Battery (9) Coil (2) Air Vents (2) Arm (2) Gearbox (9) Spark plugs (16) Glow plugs (2) Carburetor (1) Bodywork (10) Glove box (2) Control unit (3) Key (16) Timing belt (20) V-belt (3) Air conditioning controls (1) -board computer (16) Checks and maintenance (97) Throttle body (2) Dashboard (13) Gearshift gaiter (3) Drive shaft boot (5) Bearing (6) Mass air flow sensor (1) Differential (3) Brake discs (3) Spacers (1) Headlight (21) Tail light (14) Fog lights (10) Air filter (21) Cabin air filter (28) Petrol filter (4) Diesel filter (6) Oil filter (9) Hand brake (5) Clutch (8) Grille (1) Injectors (4) Accessory Kit (6) Light bulb (16) Side turn signal light bulb (1) Headlight bulb (22) Rear light bulb (10) Interior lights ceiling light bulb (2) Antifreeze liquid (4) Dashboard light (12) License plate light (3) Handle (2) Muffler (5) Engine (10) Window motor (4) Starter motor (4) Gear oil (4) Engine oil (13) Door panel (20) Windshield (3) Front bumper (8) Rear bumper (7) Brake pads (15) Hydraulic pistons (4) Tires (4) Gear Shift Knob (14) Pump (10) Fuel pump (14) Door (5) Push button (1) Instrument cluster (22) Radiator (7) Passenger compartment heating radiator (9) Wheel (2) Fuse box (21) Seat (30) Drive shaft (4) Crankshaft RPM sensor (3) Parking sensors (3) Lock (10) Suspensions (2) Outside rearview mirror (22) Interior rearview mirror (2) Manufacturer's coat of arms (2) Engine mount (3) Drums and shoes (4) Windscreen wipers (16) Thermostat (11) Engine head (1) Steering rods (2) Transmission (10) Central tunnel (2) Turbine (1) Windshield washer nozzle (2) Valve (2) EGR valve (2) Interior blower (4) Side window (3) Steering wheel (13)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos