Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Panda
  6. : EGR valve

Fiat Panda - EGR valve

EGR Valve Fiat Panda (2003-2012 / 169, mk 2)

Fiat Panda (2003-2012 / 169, MK 2)
How to test and clean the EGR valve of the Fiat Panda 1.3 Multijet

Today in this guide, we will see the instructions that will allow us to test and clean the EGR valve of the Fiat Panda 1.3 Multijet. First, we open the hood …Read all…
Posted on 8 May 2024 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
How to Remove the EGR Valve on the Fiat Panda 169 1.3 MultiJet?

In today's tutorial, you will learn how to remove the EGR valve on the Fiat Panda 169 with a 1.3 MultiJet engine. First, open the bonnet of your car and start …Read all…
Posted on 6 June 2026 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
Disassembly and Cleaning of EGR Valve

The EGR valve allows a portion of exhaust gases to re-enter the intake to reduce emissions: for this reason, over time, it tends to clog and not function …Read all…
Posted on 8 February 2026 by ScegliAuto

Cigarette lighter (4) Airbag (15) Alternator (4) Speaker (1) Shocks (18) Antenna (1) Air conditioning (4) Car stereo (38) Anti-roll bar (1) Roof rack bars (5) Battery (13) Ignition coil (2) Air vents (2) Control arm (3) Transmission (9) Spark plugs (18) Glow plugs (2) Carburetor (2) Body (15) Glove compartment (2) Snow chains (1) Control unit (4) Key (25) Timing belt (34) V-belt (3) Air conditioner (1) A/C controls (2) Onboard computer (8) Checks and maintenance (71) Throttle body (2) Dashboard (14) Shifter boot (5) CV boot (5) Bearing (7) MAF sensor (1) Differential (4) Brake rotors (3) Wheel spacers (1) Headlight (31) Tail light (18) Fog lights (10) Air filter (29) Cabin air filter (35) Fuel filter (4) Diesel fuel filter (7) Oil filter (10) Parking brake (5) Clutch (9) Grille (1) Fuel injectors (4) Accessory kit (5) Light bulb (20) Side marker bulb (2) Headlight bulb (29) Tail light bulb (13) Interior dome light bulb (2) Antifreeze coolant (5) Instrument panel light (12) License plate light (5) (1) Handle (3) Exhaust muffler (6) Engine (10) Power window motor (4) Starter motor (8) Transmission fluid (5) Engine oil (16) Clock (36) Door trim panel (22) Windshield (3) Front bumper (10) Rear bumper (8) Brake pads (18) Hydraulic pistons (3) Shift knob (16) Pump (12) Fuel pump (15) Car door (6) Push button (1) Instrument cluster (11) Radiator (7) Heater core (11) Wheel (3) Fuse box (36) Seat (33) Axle shaft (4) Crankshaft position sensor (3) Parking sensors (3) Door lock (11) Suspension system (2) Side mirror (24) Rearview mirror (2) Warning light – error code (21) (22) Tire pressure warning light (9) Service warning light (44) Manufacturer emblem (2) Engine mount (3) Brake drums and shoes (4) Fuel cap (3) Windshield wipers (20) Thermostat (12) Cylinder head (1) Tie rods (2) Drivetrain (11) Center console tunnel (2) Turbocharger (1) Windshield washer nozzle (2) Valve (2) EGR valve (3) Blower motor (5) Side window (4) Steering wheel (14)

How to Open the Fuel Filler Flap on a Hyundai i20?

In this tutorial, you will see how to open the fuel filler flap on a Hyundai i20, a very simple operation similar to that of many vehicles. First, go inside the cabin; it is not necessary to insert the key or unlock all the locks, then locate and operate the lever situated in the lower left area of the cabin, right next to the driver's seat. Once done, exit the vehicle, fully open the flap, and unscrew the fuel cap. To close the flap, simply press it gently until you hear a click.

Watch the video!


by ScegliAuto

More videos