Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : Axle shaft

Fiat Panda - Axle shaft

Axle Shaft Fiat Panda (1980-2003 / mk 1, 141)

Fiat Panda (1980-2003 / MK 1, 141)
Replacing the CV Joint on a Fiat Panda
If you need to carry out extraordinary maintenance on your vehicle, specifically replacing the CV joint, follow the instructions below and refer to the video …Read all…
Posted on 21 September 2026 by ScegliAuto
Fiat Panda (1980-2003 / MK 1, 141)
Removing the Front Driveshaft Boot on Fiat Panda 4x4
See how to replace the boot on the driveshaft of the legendary Fiat Panda 4x4. First, remove the brake caliper by taking out the bolt that holds it in place; …Read all…
Posted on 10 April 2026 by ScegliAuto
Fiat Panda (1980-2003 / MK 1, 141)
How to Remove the CV Boot on Fiat Panda
Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, …Read all…
Posted on 21 March 2026 by ScegliAuto
Fiat Panda (1980-2003 / MK 1, 141)
Front Hub Support Revision
The hub support plate integrates a spherical joint that tends to wear and develop play over time: it is possible to purchase a new support plate complete with …Read all…
Posted on 12 February 2026 by ScegliAuto
Cigarette lighter (4) Airbag (15) Alternator (4) Speaker (2) Shocks (18) Antenna (1) Air conditioning (4) Car stereo (38) Anti-roll bar (1) Roof rack bars (5) Battery (13) Ignition coil (2) Air vents (2) Control arm (3) Transmission (9) Spark plugs (19) Glow plugs (2) Carburetor (2) Body (15) Glove compartment (2) Snow chains (1) Control unit (4) Key (25) Timing belt (35) V-belt (3) Air conditioner (1) A/C controls (2) Onboard computer (8) Checks and maintenance (72) Throttle body (2) Dashboard (14) Shifter boot (5) CV boot (5) Bearing (7) MAF sensor (1) Differential (4) Brake rotors (3) Wheel spacers (1) Headlight (31) Tail light (18) Fog lights (10) Air filter (29) Cabin air filter (36) Fuel filter (4) Diesel fuel filter (7) Oil filter (10) Parking brake (5) Clutch (9) Grille (1) Fuel injectors (4) Accessory kit (5) Light bulb (20) Side marker bulb (2) Headlight bulb (30) Tail light bulb (13) Interior dome light bulb (2) Antifreeze coolant (5) Instrument panel light (12) License plate light (5) (1) Handle (3) Exhaust muffler (6) Engine (10) Power window motor (4) Starter motor (8) Transmission fluid (5) Engine oil (16) Clock (36) Door trim panel (22) Windshield (3) Front bumper (10) Rear bumper (8) Brake pads (18) Hydraulic pistons (3) Shift knob (16) Pump (12) Fuel pump (15) Car door (6) Push button (1) Instrument cluster (11) Radiator (7) Heater core (11) Wheel (3) Fuse box (37) Seat (33) Axle shaft (4) Crankshaft position sensor (3) Parking sensors (3) Door lock (11) Suspension system (2) Side mirror (24) Rearview mirror (2) Warning light – error code (21) Tire pressure warning light (33) Service warning light (44) Manufacturer emblem (2) Engine mount (3) Brake drums and shoes (4) Fuel cap (3) Windshield wipers (21) Thermostat (12) Cylinder head (1) Tie rods (2) Drivetrain (11) Center console tunnel (2) Turbocharger (1) Windshield washer nozzle (2) Valve (2) EGR valve (3) Blower motor (5) Side window (4) Steering wheel (14)

Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?

The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished.

Watch the video!


by ScegliAuto

More videos