Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : Fog lights

Fiat Panda - Fog lights

Fiat Panda (2012-2023 / MK 3, 319)
How to replace the front fog light bulb of the Fiat Panda.
Today's guide will show us the steps on how to disassemble and replace the front fog light bulb of the Fiat Panda, following the instructions below. In order …read all…
Posted on 31 August 2023 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
How do you replace the fog lights on the Fiat Panda?
To be able to replace the fog lights of the Fiat Panda, you need to loosen the screws located next to the headlight, above the plastic panel that surrounds the …read all…
Posted on 23 May 2022 by ScegliAuto
Fiat Panda (2012-2023 / MK 3, 319)
How to replace the fog lights with a led model on the Fiat Panda Cross?
If we want to replace the car fog light with an equivalent model but with LED light, it is necessary to proceed as follows: open the bonnet, remove the screws …read all…
Posted on 25 April 2022 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
How they turn on and what are the fog lights on the Fiat Panda for
The fog lights are located in the lower part on the sides of the front bumper and, at the rear, on the left headlight assembly. The two front lights are …read all…
Posted on 26 April 2024 by ScegliAuto
Fiat Panda (2012-2023 / MK 3, 319)
Fiat Panda fog light replacement
In this video tutorial we will see how to remove and replace the front fog light bulbs on a third series Fiat Panda. First of all we are going to remove the …read all…
Posted on 22 March 2024 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
How to replace the fog light bulbs of a Fiat Panda
With a slotted screwdriver we start by unscrewing the two screws on the lower side of the fog light. As soon as we have unscrewed these screws, we will …read all…
Posted on 17 February 2024 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
Replacement fog light bulb on Fiat Panda 169
In today's video tutorial we will see how to remove the front fog light and how to replace its bulb on a Fiat Panda 169, in the 100 HP version. First we are …read all…
Posted on 20 January 2024 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
How to remove the fog light of a Fiat Panda
Let's see how to remove the fog light with attached bulb on Fiat Panda. Let's get ready to disassemble the side fog light placed in the bumper: with a special …read all…
Posted on 12 November 2023 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
How to replace the Fiat Panda fog light bulbs
As a first operation, disconnect the plugs from the battery to protect the various electronic components of your car, then you can now go and operate on the …read all…
Posted on 25 September 2023 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
How to change the fog light bulb of the Fiat Panda
To replace the bulb of the lower fog light applied along the lower edge of the bumper, the best solution is to remove the headlight itself from its seat: then …read all…
Posted on 17 September 2023 by ScegliAuto
Cigarette Lighter (3) Airbags (10) Alternator (4) Shock absorbers (15) Antenna (1) Air conditioning (4) Car stereo (33) Roof Rack Bars (4) Battery (9) Coil (2) Air Vents (2) Arm (2) Gearbox (9) Spark plugs (16) Glow plugs (2) Carburetor (1) Bodywork (10) Glove box (2) Control unit (3) Key (16) Timing belt (20) V-belt (3) Air conditioning controls (1) -board computer (16) Checks and maintenance (97) Throttle body (2) Dashboard (13) Gearshift gaiter (3) Drive shaft boot (5) Bearing (6) Mass air flow sensor (1) Differential (3) Brake discs (3) Spacers (1) Headlight (21) Tail light (14) Fog lights (10) Air filter (21) Cabin air filter (28) Petrol filter (4) Diesel filter (6) Oil filter (9) Hand brake (5) Clutch (8) Grille (1) Injectors (4) Accessory Kit (6) Light bulb (16) Side turn signal light bulb (1) Headlight bulb (22) Rear light bulb (10) Interior lights ceiling light bulb (2) Antifreeze liquid (4) Dashboard light (12) License plate light (3) Handle (2) Muffler (5) Engine (10) Window motor (4) Starter motor (4) Gear oil (4) Engine oil (13) Door panel (20) Windshield (3) Front bumper (8) Rear bumper (7) Brake pads (15) Hydraulic pistons (4) Tires (4) Gear Shift Knob (14) Pump (10) Fuel pump (14) Door (5) Push button (1) Instrument cluster (22) Radiator (7) Passenger compartment heating radiator (9) Wheel (2) Fuse box (21) Seat (30) Drive shaft (4) Crankshaft RPM sensor (3) Parking sensors (3) Lock (10) Suspensions (2) Outside rearview mirror (22) Interior rearview mirror (2) Manufacturer's coat of arms (2) Engine mount (3) Drums and shoes (4) Windscreen wipers (16) Thermostat (11) Engine head (1) Steering rods (2) Transmission (10) Central tunnel (2) Turbine (1) Windshield washer nozzle (2) Valve (2) EGR valve (2) Interior blower (4) Side window (3) Steering wheel (13)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos