Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : How they turn on and what are the fog lights on the Fiat Panda for

Fiat Panda - Video tutorial

Model: Fiat Panda MK 2, 169 - Years 2003-2012
Part: Fog lights
Operation: How they turn on and what are the fog lights on the Fiat Panda for

The fog lights are located in the lower part on the sides of the front bumper and, at the rear, on the left headlight assembly. The two front lights are positioned very low in order to have the possibility of "cleaving" the fog, ie their light beam is as close as possible to the asphalt. While the rear light is red and very powerful in order to guarantee visibility to those who follow the car always in case of fog. The ignition controls are located in the center console, the control is identified with the symbol of the lighthouse on with dashes representing the fog pointing downwards and to the left for the headlights and a button with the symbol of the headlight with dashes horizontal and to the right for the rear light.


Posted on 26 April 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Panda 2003-2012 - Where are the fog lights located in the Fiat Panda? Read Answer
    • Panda 2003-2012 - How do you replace the fog lights on the Fiat Panda? Read Answer
    • Panda 2012-2023 - How much do the fog lights (assembly included) cost on a 2020 Fiat Panda Easy? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos