Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Light Bulbs on the Fiat Panda?

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Light bulb

See other generations:
Video tutorial

To replace the fog light bulbs on the Fiat Panda, loosen the Allen screws located at the top of the lamp and the Torx screws at the bottom. Use a flathead screwdriver to pry out the headlamp completely and disconnect the connector attached to the bulb.

At this point, you can remove the old bulb from its housing and replace it with a new one. The new bulb should be reconnected to the connector using the clip. Finally, refit the entire fog light assembly.


Updated on 22 April 2026 by ScegliAuto


Related tutorials

Replacing Fog Lights on a Fiat Panda
Replacing Fog Lights on a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) In this video tutorial, you will see how to remove and replace the bulbs of the front fog lights on a Fiat Panda third series. First, remove the scre…
How to Remove the Headlight Bulb on a Fiat Panda
How to Remove the Headlight Bulb on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Are the bulbs blown in the front headlight of your Fiat Panda? Here’s how to replace them. Lift the bonnet and secure it. Remove the cap covering the…
How to Replace the Rear Headlamp Bulbs on the Fiat Panda 2
How to Replace the Rear Headlamp Bulbs on the Fiat Panda 2
Fiat Panda (2003-2012 / 169, MK 2) Today, in this video tutorial, we will see how to disassemble and replace the rear headlamp bulbs on the Fiat Panda 169, second generation. First, op…

    Frequently Asked Questions

    • Panda 2003-2012 - How many reversing lights are there on the Fiat Panda? Read answer

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos