Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the backlight bulbs of the Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Light bulb

In this video, we will see how to change the backlight bulbs of the Fiat Panda: they are T5 bulbs with 2 Watts. First, we need to lock all the knobs either to the right or to the left, so as not to lose the adjustment; then we detach the panel with plastic levers, in order to remove the clips. This way, the knobs will also come off in pairs. To handle the bulbs, we use masking tape, so as not to touch them with our hands, also because they are very thin and delicate: to insert them, a light pressure is enough. We check if they work and reassemble the knobs, after which we can push the dashboard back to its original position, and that's it.

Posted on 28 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulbs of the Fiat Panda
How to replace the rear headlight bulbs of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Today we will discover step-by-step instructions on how to disassemble and replace the bulbs of the rear light of the Fiat Panda. First, open the rea…
How to Replace the Front Bulbs of the Fiat Panda
How to Replace the Front Bulbs of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In today's video, you will learn how to replace the front bulbs of the Fiat Panda. First, open the front bonnet. If necessary, remove the fuse box. T…
How to Remove the Headlight Bulb on a Fiat Panda
How to Remove the Headlight Bulb on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Are the bulbs blown in the front headlight of your Fiat Panda? Here’s how to replace them. Lift the bonnet and secure it. Remove the cap covering the…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2003-2012 - How many reversing lights are there on the Fiat Panda? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos