Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Stop Bulbs on a Fiat Panda 319

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Light bulb

Let's see how to replace the stop bulbs on a Fiat Panda 319. You need to unscrew the two bolts and then pull the light towards you because it has two sliding clips; do not be afraid to pull. After that, disconnect the electrical connector, and now the light is in your hands. Turn the light around and unscrew the screws that hold the cover to access the bulb holder. Here you will find common halogen bulbs, and the one we need to change is a dual filament bulb because the light also serves as a stop, performing two functions. Take the opportunity to clean it and be careful not to touch the bulb with bare hands, as the oil from your fingers could damage it. Now close the light and put it back in place with the two screws and reconnect the connector.

Posted on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulbs on Fiat Panda 3
Fiat Panda (2012-2026 / 319, MK 3) In this video, we will see the main steps to remove the rear light and replace the bulbs on a Fiat Panda 319, third series. First, open the boot lid …
How to replace the third brake light bulb of the Fiat Panda
How to replace the third brake light bulb of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To replace the third brake light of the Fiat Panda, start by opening the trunk; once the trunk is open, you will find a cover in the center of the gl…
How to Remove and Replace the Third Brake Light on a Fiat Panda 169
How to Remove and Replace the Third Brake Light on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) Today, you will see the instructions that will allow you to remove and replace the third brake light, or replace the bulbs, on a Fiat Panda 169, seco…

    Frequently Asked Questions

    • Panda 2003-2012 - How many reversing lights are there on the Fiat Panda? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos