Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : How do you replace the fog lights on the Fiat Panda?

Fiat Panda - Video tutorial

Model: Fiat Panda MK 2, 169 - Years 2003-2012
Part: Fog lights
Operation: How do you replace the fog lights on the Fiat Panda?

To be able to replace the fog lights of the Fiat Panda, you need to loosen the screws located next to the headlight, above the plastic panel that surrounds the latter. Once the plastic cover has been removed, it will be possible to access the fog lamp, which can be removed by disconnecting the connector at its rear. Once the old headlight has been removed, it will be possible to insert a new one which will then have to be connected to the connector. When the new headlight has been connected, it will be possible to insert the special plastic cover that surrounds it.


Posted on 23 May 2022 by ScegliAuto

    Frequently Asked Questions

    • Panda 2003-2012 - Where are the fog lights located in the Fiat Panda? Read Answer
    • Panda 2003-2012 - How do you replace the fog lights on the Fiat Panda? Read Answer
    • Panda 2012-2023 - How much do the fog lights (assembly included) cost on a 2020 Fiat Panda Easy? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos