Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front bumper of the Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Front bumper

In this guide, we will see the instructions that will allow us to disassemble and replace the front bumper of the Fiat Panda. First, we open the car's hood and start unscrewing all the fixing screws we find on the top of the bumper, removing the plastic grille first; we then unscrew the additional screws located on both sides of the front wheel arches, as shown in the video. At this point, we gently detach the bumper on the sides until it is completely removed, replacing it with the new one, applying the reverse process for reassembly!

Posted on 16 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper of a Fiat Panda
How to Remove the Front Bumper of a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, open the front bonnet of your Fiat Panda. Begin by removing the front grille by unscrewing the relevant fixing screws. Next, unscrew…
Removing the Front Bumper from a Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) Hello everyone! In this tutorial, you will learn how to remove the front bumper from an old model Fiat Panda. Although it is possible to remove the b…
How to Remove the Front Bumper on a Fiat Panda?
How to Remove the Front Bumper on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) The front bumper on a Fiat Panda is held in place by a series of bolts located at the bottom of the bumper, beneath the grille and under the splash g…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2003-2012 - How much does it cost to replace the front bumper on a Fiat Panda? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos