Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : Removing the front bumper Fiat Panda

Fiat Panda - Video tutorial

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Front bumper
Operation: Removing the front bumper Fiat Panda

Hello everyone! In this tutorial you will be shown how to remove the front bumper on old model Fiat Panda. Although it is possible to remove the bumper of the Fiat Panda 141 without removing the support brackets, I am talking about the classic procedure, which involves removing them. To disassemble them, it is necessary to work in the wheel arches, in some versions there is also the need to remove the plastic stone cover, from the wheel arch on the driver's side it is also necessary to remove the activated carbon filter that covers the bolting of the relative bracket.


Posted on 11 March 2024 by ScegliAuto

This video is currently unavailable

    Frequently Asked Questions

    • Panda 2012-2021 - How much does it cost to replace the front bumper on the Fiat Panda? Read Answer
    • Panda 2012-2023 - How much does it cost to replace the front bumper of the Fiat Panda? Read Answer
    • Panda 2003-2012 - How much does it cost to replace the front bumper on a Fiat Panda? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos