Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Bumper Removal on Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Front bumper

See other generations:
Video tutorial

Loosen the bolts of the front wheels, lift the car with a jack, and completely unscrew them to remove them. Unscrew the screws and nuts (one on each side) located under both wheel arches.

Then, move the wheel arch cover to access and unscrew the T30 Torx that secures the bumper (obviously on both sides). The hard part is done: now work on the lower area of the bumper by simply unscrewing all eight T30 Torx screws and the two side screws.

Finally, unscrew the screws that secure the bumper from above and you're done. Carefully extract the bumper.


Updated on 4 April 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of a Fiat Panda
How to Remove the Front Bumper of a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, open the front bonnet of your Fiat Panda. Begin by removing the front grille by unscrewing the relevant fixing screws. Next, unscrew…
How to Fit a Front Bumper on Fiat Panda
How to Fit a Front Bumper on Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) How do you fit a front bumper on Fiat Panda? Follow these steps, which are not too complex if done in order. First, take the bumper and position it p…
Removing the Front Bumper from a Fiat Panda
Fiat Panda (1980-2003 / MK 1, 141) Hello everyone! In this tutorial, you will learn how to remove the front bumper from an old model Fiat Panda. Although it is possible to remove the b…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos