Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front bumper on the Fiat Panda?

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Front bumper

In this tutorial we can see how to remove the front bumper in the Fiat Panda, an extremely simple and quick operation. First, we open the hood, then we remove the upper plastic grille by unscrewing the screws with a cross-tip screwdriver. We then unscrew the screws that have just been released with a Torx key, continue with the bolts accessible from inside both wheel arches, and finish with the lower screws. At this point, we can grab the bumper, detach it from the frame, and disconnect the connectors of the fog lights, if present.

Posted on 29 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper of a Fiat Panda
How to Remove the Front Bumper of a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, open the front bonnet of your Fiat Panda. Begin by removing the front grille by unscrewing the relevant fixing screws. Next, unscrew…
How to Fit a Front Bumper on Fiat Panda
How to Fit a Front Bumper on Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) How do you fit a front bumper on Fiat Panda? Follow these steps, which are not too complex if done in order. First, take the bumper and position it p…
How to remove the front bumper of the Fiat Panda
How to remove the front bumper of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this guide, we will see the instructions that will allow us to disassemble and replace the front bumper of the Fiat Panda. First, we open the car'…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2003-2012 - How much does it cost to replace the front bumper on a Fiat Panda? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos