Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Panda
  6. : How to remove the central grille on Fiat Panda

Fiat Panda - Video tutorial

Model: Fiat Panda MK 2, 169 - Years 2003-2012
Part: Grille
Operation: How to remove the central grille on Fiat Panda

How to remove the black plastic central grille with the logo on the front bumper of a Fiat panda? Once opened and lift the front hood of the car; with a socket wrench or insert screwdriver, unscrew the locking pins located above the mask. We remove the grille placed in the center of the hood and unscrew the logo with the appropriate key. Once all the parts have been removed, we proceed with the reassembly: we are going to fix the logo on the grille, tightening the pins on it. Finally we proceed to tighten all the pins around the grill. We check the correct assembly of the pieces.


Posted on 27 October 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos