Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the front headlight of a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Headlight

See other generations:
Video tutorial

In today's video, we will see how to disassemble the front headlight of a Fiat Panda, model 169. We start by removing the radiator grille and unscrewing all the fixing screws of the front bumper as shown in the video, these screws are located under the radiator grille, under the bumper, and behind the inner wheel arches.

Once the front bumper is detached, we can proceed to disconnect the bulb wiring from the back of the headlight and then unscrew the three fixing screws of the headlight with a 10mm wrench.

Once this is done, we can remove the old headlight and replace it with a new one.


Posted on 19 February 2025 by ScegliAuto


Related tutorials

Replacing the Front Headlight on a Fiat Panda
Replacing the Front Headlight on a Fiat Panda
Fiat Panda (1980-2003 / MK 1, 141) Replacing the front headlight on a Fiat Panda? Let's see how to proceed with the disassembly in the video tutorial. Open the bonnet by pulling the bo…
How to replace the front headlight of the Fiat Panda
How to replace the front headlight of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Today we will explain how to replace the front headlight of the 2005 Fiat Panda. To replace the headlight, we need to open the front hood of the car …
Disassembly of the front headlight of a Fiat Panda
Disassembly of the front headlight of a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Thanks to this very useful video tutorial today we will see the entire step-by-step procedure to disassemble and replace the front headlight of a Fia…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos