Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the front headlight of a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Headlight

Thanks to this very useful video tutorial today we will see the entire step-by-step procedure to disassemble and replace the front headlight of a Fiat Panda, second generation model produced from 2003 to 2012. Let's see how to proceed. First, we need to remove the front bumper of the car, to do this we have to unscrew all its fixing screws located inside the front wheel arches, under the bumper, and under the radiator grille. Once the bumper is removed, we can proceed to remove the three fixing screws of the headlight with a 10mm wrench as shown in the video, then we remove the bulb connectors and finally disassemble the old headlight to replace it with a new one following the reverse procedure.

Posted on 28 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Headlamp and Bulb on the Fiat Panda 169
Removing the Front Headlamp and Bulb on the Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) Discover how to remove the front headlamp and replace the bulb on the Fiat Panda 169, second series. First, remove the front wheel arch liner by unsc…
How to Remove the Headlight Bulb on a Fiat Panda
How to Remove the Headlight Bulb on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Are the bulbs blown in the front headlight of your Fiat Panda? Here’s how to replace them. Lift the bonnet and secure it. Remove the cap covering the…
How to replace the front headlight bulb of the Fiat Panda
How to replace the front headlight bulb of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Replacing the front headlight bulb of your Fiat Panda is really very simple and to complete the operation you just need to follow the procedure descr…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos