Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Front bumper

Before starting, open the front bonnet of your Fiat Panda. Begin by removing the front grille by unscrewing the relevant fixing screws. Next, unscrew and remove the screws securing the front bumper, located in the front wheel arches and on the lower and upper sides. By doing this, you will have freed the front bumper. Proceed to unclip and extract the front bumper from its housing. At this point, disconnect the electrical connectors, and you will have completed the disassembly.

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper on a Fiat Panda?
How to Remove the Front Bumper on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) The front bumper on a Fiat Panda is held in place by a series of bolts located at the bottom of the bumper, beneath the grille and under the splash g…
How to disassemble the front bumper on the Fiat Panda?
How to disassemble the front bumper on the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) In this tutorial we can see how to remove the front bumper in the Fiat Panda, an extremely simple and quick operation. First, we open the hood, then …
Removing the Front Bumper from Fiat Panda
Removing the Front Bumper from Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) In this video tutorial, you will see how to remove the front bumper from a first-generation Fiat Panda. First, remove the wheel arch liners by unscre…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2003-2012 - How much does it cost to replace the front bumper on a Fiat Panda? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos