Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : Injectors

Fiat Panda - Injectors

Fiat Panda (2003-2012 / 169, MK 2)
How do you replace the injectors on the Fiat Panda?
In order to replace the injectors on the Fiat Panda, you need to open the bonnet so that you can remove the upper cover of the engine block. Under this cover …read all…
Posted on 7 December 2022 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
How to clean the petrol injectors in the Fiat Panda 169
In this video we can see how to clean the Petrol injectors in the Fiat Panda 169. The material needed to perform this procedure: a cleaning product, 4 …read all…
Posted on 5 May 2024 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
How to remove the injectors of the 2007 Fiat Panda Young
In this video we can see how to remove the injectors of the Fiat Panda. Let's start by disassembling the Airbox, so we must also remove the tubes that connect …read all…
Posted on 12 March 2024 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
How to remove the rail and the petrol injectors on the Fiat Panda 169
In this video we see the step by step instructions to be able to disassemble and replace the rail and the petrol injectors on the Fiat Panda 169, with 1.2 …read all…
Posted on 18 February 2024 by ScegliAuto
Cigarette Lighter (3) Airbags (10) Alternator (4) Shock absorbers (15) Antenna (1) Air conditioning (4) Car stereo (33) Roof Rack Bars (4) Battery (9) Coil (2) Air Vents (2) Arm (2) Gearbox (9) Spark plugs (16) Glow plugs (2) Carburetor (1) Bodywork (10) Glove box (2) Control unit (3) Key (16) Timing belt (20) V-belt (3) Air conditioning controls (1) -board computer (16) Checks and maintenance (97) Throttle body (2) Dashboard (13) Gearshift gaiter (3) Drive shaft boot (5) Bearing (6) Mass air flow sensor (1) Differential (3) Brake discs (3) Spacers (1) Headlight (21) Tail light (14) Fog lights (10) Air filter (21) Cabin air filter (28) Petrol filter (4) Diesel filter (6) Oil filter (9) Hand brake (5) Clutch (8) Grille (1) Injectors (4) Accessory Kit (6) Light bulb (16) Side turn signal light bulb (1) Headlight bulb (22) Rear light bulb (10) Interior lights ceiling light bulb (2) Antifreeze liquid (4) Dashboard light (12) License plate light (3) Handle (2) Muffler (5) Engine (10) Window motor (4) Starter motor (4) Gear oil (4) Engine oil (13) Door panel (20) Windshield (3) Front bumper (8) Rear bumper (7) Brake pads (15) Hydraulic pistons (4) Tires (4) Gear Shift Knob (14) Pump (10) Fuel pump (14) Door (5) Push button (1) Instrument cluster (22) Radiator (7) Passenger compartment heating radiator (9) Wheel (2) Fuse box (21) Seat (30) Drive shaft (4) Crankshaft RPM sensor (3) Parking sensors (3) Lock (10) Suspensions (2) Outside rearview mirror (22) Interior rearview mirror (2) Manufacturer's coat of arms (2) Engine mount (3) Drums and shoes (4) Windscreen wipers (16) Thermostat (11) Engine head (1) Steering rods (2) Transmission (10) Central tunnel (2) Turbine (1) Windshield washer nozzle (2) Valve (2) EGR valve (2) Interior blower (4) Side window (3) Steering wheel (13)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos