Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : How to remove the rail and the petrol injectors on the Fiat Panda 169

Fiat Panda - Video tutorial

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Injectors
Operation: How to remove the rail and the petrol injectors on the Fiat Panda 169

In this video we see the step by step instructions to be able to disassemble and replace the rail and the petrol injectors on the Fiat Panda 169, with 1.2 engine. First we open the bonnet of our car and start by removing the upper air filter box; after which we are going to disconnect the fuel pipe that reaches the rail, as well as disconnect the electrical connector of the sensor. At this point we are going to remove the whole block of the rail, as illustrated in the video; now we can also remove the injectors, eventually replacing them with new ones: then reassemble everything!


Posted on 18 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Panda 2012-2023 - Where are the injectors of the Fiat Panda LPG located? Read Answer
    • Panda 1980-2003 - What to do if the injector warning light comes on on a Fiat Panda 900? Read Answer
    • Panda 2012-2023 - Problem with the injectors on the Fiat Panda? Read Answer
    • Panda 2003-2012 - What problems do the injectors of the Fiat Panda on LPG have? Read Answer
    • Panda 2012-2023 - How much do the Fiat Panda LPG injectors cost? Read Answer
    • Panda 2012-2023 - How much does it cost to replace the injectors of the Fiat Panda LPG? Read Answer
    • Panda 2003-2012 - How much does it cost to replace the injectors of the Fiat Panda LPG? Read Answer
    • Panda 2012-2023 - What to do if the LPG Fiat Panda has problems with the injectors? Read Answer
    • Panda 2012-2023 - Injector warning light on Fiat Panda 4x4, why? Read Answer
    • Panda 2003-2012 - How are the methane injectors installed on the 2009 Fiat Panda? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos