Do it yourself
| ||||
|
Fiat Panda - Video tutorial
Model: Fiat Panda
169, MK 2
- Years 2003-2012 In this video we can see how to remove the injectors of the Fiat Panda. Let's start by disassembling the Airbox, so we must also remove the tubes that connect to the Airbox. To facilitate the operation we can also use an unscrewer. Now we have to unscrew two torx screws that hold the Reil; we start unscrewing with a T30 torx wrench. Now we can disconnect the injectors; once the injectors have been removed, they must also be disconnected from the current. To make the job easier we can remove the oil rod; start removing the first injector. So with the help of pliers you have to remove all the connectors. At this point we detach the petrol pipe by pulling the two fins. At this point the injector reil should come off. Now you have to remove the injectors from the reil by gripping the pins that keep them in place. Carry out cleaning and replacement and reverse all steps.
Posted on 12 March 2024 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to replace the AdBlue tank on Peugeot 3008In order to replace the AdBlue tank on the car it is necessary to know that it is located above the diesel tank and therefore under the rear trunk floor and to access it it is necessary: first of all lift the car on the deck, then remove the lower metal protective casing of the tank and under it we will find the diesel tank. Then proceed to disassemble the tank with the help of a forklift to support it. Once the diesel tank has been freed and lowered, above it we will find the small AdBlue tank. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.015
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |