Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : Pump

Fiat Panda - Pump

Fiat Panda (2003-2012 / 169, MK 2)
How to replace the windshield washer pump of the Fiat Panda.
Today's steps will show us how to disassemble and replace the windshield washer pump of the Fiat Panda. First, we open the engine hood and start dismantling …read all…
Posted on 12 February 2024 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
Replacement of the windshield washer pump of the Fiat Panda.
Let's briefly see in this guide the main steps that will allow us to disassemble and replace the windshield washer pump of the Fiat Panda. First, let's move to …read all…
Posted on 26 October 2023 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
How do you replace the water pump on the Fiat Panda?
In order to replace the water pump on the Fiat Panda, the car must be lifted so that the front right wheel does not touch the floor: the latter must then be …read all…
Posted on 20 December 2022 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
Guide to replace the water pump on Fiat Panda 1.2 (169)
We see in this guide the main instructions for disassembling and replacing the water pump, but also the timing belt, on the Fiat Panda 1.2, second series. …read all…
Posted on 26 February 2024 by ScegliAuto
Fiat Panda (1980-2003 / 141, MK 1)
How to remove the toothed belt on a Fiat Panda
Let's see how to remove the toothed belt on a Fiat Panda. Lift the bonnet and put it in safety, then, with a screwdriver, unscrew the locking pins of the …read all…
Posted on 18 November 2023 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
How to remove the windshield wiper water pump on a Fiat panda
Let's see how to disassemble the water pump of the windshield wipers of a Fiat panda. With a screwdriver, unscrew the screws of the right stone guard, remove …read all…
Posted on 14 October 2023 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
How to replace the windshield wiper pump on a Fiat Panda
Do you want to remove the defective windshield wiper pump? Let's see in this detailed video how to proceed on a Fiat Panda. Let's start with a socket wrench to …read all…
Posted on 1 October 2023 by ScegliAuto
Fiat Panda (1980-2003 / 141, MK 1)
How to change the water pump on the Fiat Panda
If only water is introduced into the engine cooling system rather than the specific liquid, rust may form in the system itself, causing damage to the water …read all…
Posted on 27 September 2023 by ScegliAuto
Fiat Panda (1980-2003 / 141, MK 1)
How to replace the Fiat Panda water pump
Unhook and lift the hood, now go and remove the intake part of the engine to be able to work more comfortably on the affected area, in this way you can work …read all…
Posted on 23 September 2023 by ScegliAuto
Fiat Panda (1980-2003 / 141, MK 1)
Disassembly and replacement of the water pump
Start removing the air box and the air tube by releasing the sealing springs. Then remove the toothed belt. Drain the radiator by acting on the valve, then …read all…
Posted on 26 June 2023 by ScegliAuto
Cigarette Lighter (3) Airbags (10) Alternator (4) Shock absorbers (15) Antenna (1) Air conditioning (4) Car stereo (33) Roof Rack Bars (4) Battery (9) Coil (2) Air Vents (2) Arm (2) Gearbox (9) Spark plugs (16) Glow plugs (2) Carburetor (1) Bodywork (10) Glove box (2) Control unit (3) Key (16) Timing belt (20) V-belt (3) Air conditioning controls (1) -board computer (16) Checks and maintenance (97) Throttle body (2) Dashboard (13) Gearshift gaiter (3) Drive shaft boot (5) Bearing (6) Mass air flow sensor (1) Differential (3) Brake discs (3) Spacers (1) Headlight (21) Tail light (14) Fog lights (10) Air filter (21) Cabin air filter (28) Petrol filter (4) Diesel filter (6) Oil filter (9) Hand brake (5) Clutch (8) Grille (1) Injectors (4) Accessory Kit (6) Light bulb (16) Side turn signal light bulb (1) Headlight bulb (22) Rear light bulb (10) Interior lights ceiling light bulb (2) Antifreeze liquid (4) Dashboard light (12) License plate light (3) Handle (2) Muffler (5) Engine (10) Window motor (4) Starter motor (4) Gear oil (4) Engine oil (13) Door panel (20) Windshield (3) Front bumper (8) Rear bumper (7) Brake pads (15) Hydraulic pistons (4) Tires (4) Gear Shift Knob (14) Pump (10) Fuel pump (14) Door (5) Push button (1) Instrument cluster (22) Radiator (7) Passenger compartment heating radiator (9) Wheel (2) Fuse box (21) Seat (30) Drive shaft (4) Crankshaft RPM sensor (3) Parking sensors (3) Lock (10) Suspensions (2) Outside rearview mirror (22) Interior rearview mirror (2) Manufacturer's coat of arms (2) Engine mount (3) Drums and shoes (4) Windscreen wipers (16) Thermostat (11) Engine head (1) Steering rods (2) Transmission (10) Central tunnel (2) Turbine (1) Windshield washer nozzle (2) Valve (2) EGR valve (2) Interior blower (4) Side window (3) Steering wheel (13)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos