Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Water Pump on a Fiat Panda

Model: Fiat Panda MK 1, 141 - Years: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
Part: Pump

See other generations:
Video tutorial

If only water is introduced into the engine cooling system instead of the proper coolant, rust may form in the system, causing damage to the water circulation pump, which can also seize up with obvious consequences. The pump is driven by the timing belt: to replace it, start by draining the coolant, remove the auxiliary belt, align the timing marks, then loosen the tensioner of the timing belt and slide it off before proceeding to replace the water pump.

A new timing belt will obviously be installed.


Updated on 24 February 2026 by ScegliAuto


Related tutorials

How to Replace the Water Pump on a Fiat Panda
How to Replace the Water Pump on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To replace the water pump on a Fiat Panda, lift the car so that the front right wheel is off the ground: this wheel will then need to be removed alon…
How to replace the water pump of a Fiat Panda?
How to replace the water pump of a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the water pump of a Fiat Panda, it is necessary to follow some key steps. First of all, make sure the engine is cold and the car is safely…
How to Remove and Replace the Timing Belt on a Fiat Panda
How to Remove and Replace the Timing Belt on a Fiat Panda
Fiat Panda (1980-2003 / MK 1, 141) How to remove and replace the timing belt on a Fiat Panda: Lift the bonnet, remove the engine soundproofing panel and the timing belt cover. Use a su…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos