Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Water Pump on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Pump

To replace the water pump on a Fiat Panda, lift the car so that the front right wheel is off the ground: this wheel will then need to be removed along with the wheel arch liner. Once these components are removed, access the pulleys around which the timing belt is arranged: by removing the pulley above the water pump, it will be possible to completely remove the pump and replace it with a new spare part. After the replacement, reinstall all previously removed components.

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replace the Water Pump on the Fiat Panda 1.2 (169)
Guide to Replace the Water Pump on the Fiat Panda 1.2 (169)
Fiat Panda (2003-2012 / 169, MK 2) In this guide, we will see the main instructions for disassembling and replacing the water pump, as well as the timing belt, on the Fiat Panda 1.2, s…
How to replace the water pump of a Fiat Panda?
How to replace the water pump of a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the water pump of a Fiat Panda, it is necessary to follow some key steps. First of all, make sure the engine is cold and the car is safely…
How to Change the Water Pump on a Fiat Panda
How to Change the Water Pump on a Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) If only water is introduced into the engine cooling system instead of the proper coolant, rust may form in the system, causing damage to the water ci…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos