Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Timing Belt in a Fiat Panda

Model: Fiat Panda MK 1, 141 - Years: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
Part: Timing belt

See other generations:
Video tutorial

To replace the timing belt on a first-generation Fiat Panda, disconnect the battery and remove the components that obstruct access to the timing side. Then, position the engine at the specified timing position, aligning the marks on the crankshaft and camshaft.

Remove the timing cover and loosen the tensioner, then slide off the old belt. It is advisable to also replace the tensioner and water pump simultaneously when it is driven by the timing belt.

Install the new belt following the indicated path exactly and keeping the timing marks aligned. Then adjust the tension using the tensioner and manually rotate the crankshaft to verify that the timing remains correctly synchronised.

Refit the cover and all previously removed components, then start the engine and check for proper operation.


Posted on 22 August 2026 by ScegliAuto


Related tutorials

How and When to Change the Timing Belt on the Fiat Panda 1.1
How and When to Change the Timing Belt on the Fiat Panda 1.1
Fiat Panda (2003-2012 / 169, MK 2) Briefly, we will see some important instructions on how and when to change the timing belt on the Fiat Panda 1.1 petrol; for this type of engine, it …
How to Replace the Timing Belt on a Fiat Panda?
How to Replace the Timing Belt on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) Good morning, today's guide aims to replace the timing belt on your Fiat Panda. Start by opening the front bonnet. Next, remove all components relate…
When to Replace the Timing Belt on a Fiat Panda?
When to Replace the Timing Belt on a Fiat Panda?
Fiat Panda (2012-2026 / 319, MK 3) The timing belt on a Fiat Panda, like on any other vehicle, should be replaced every 75,000 miles. However, sometimes the timing belt can wear out pr…

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos