Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the windshield washer pump of the Fiat Panda

Model: Fiat Panda 319, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Pump

See other generations:
Video tutorial

Today's instructions will allow us to disassemble and replace the windshield washer pump of the Fiat Panda. To access it, it is necessary to remove the front bumper by unscrewing all the fastening screws found at the top and on both sides of the front wheel arches; we find the pump in front of the right front wheel, as shown in the video.

At this point, we detach the pump from the washer fluid reservoir by disconnecting the fluid hose and the electrical connector; we replace the windshield washer pump with the new original one, finally checking that it works correctly!


Posted on 1 January 2026 by ScegliAuto


Related tutorials

Guide to Replace the Water Pump on the Fiat Panda 1.2 (169)
Guide to Replace the Water Pump on the Fiat Panda 1.2 (169)
Fiat Panda (2003-2012 / 169, MK 2) In this guide, we will see the main instructions for disassembling and replacing the water pump, as well as the timing belt, on the Fiat Panda 1.2, s…
Guide to Replacing the Cabin Fan on a Fiat Panda
Guide to Replacing the Cabin Fan on a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) In this brief and simple guide, you will see the steps to dismantle and replace the cabin fan on a Fiat Panda. First, get inside the vehicle and loca…
How to replace the rear windshield wiper of the Fiat Panda
How to replace the rear windshield wiper of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) If you are planning to replace the rear windshield wiper of your Fiat Panda second series by yourself, just read the following guide carefully and ap…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos